##<?php exit(); ?>##
####################
# General Config
####################

####################
# Path Vars
####################

# The path to your ampache install
# Do not put a trailing / on this path 
# For example if your site is located at http://localhost
# than you do not need to enter anything for the web_path
# if it is located at http://localhost/music you need to 
# set web_path to /music
# DEFAULT: ""
#web_path 	= ""

###############################
# Session and Login Variables #
###############################

# Hostname of your Database
# DEFAULT: localhost
local_host = localhost

# Name of your ampache database
# DEFAULT: ampache
local_db = ampache

# Username for your ampache database
# DEFAULT: ""
local_username = username

# Password for your ampache database, this can not be blank
# this is a 'forced' security precaution, the default value
# will not work
# DEFAULT: ""
local_pass = password

# Length that a session will last, the default is very restrictive
# at 15min
# DEFAULT: 900
local_length = 900

# This length defines how long a 'remember me' session and cookie will 
# last, the default is 900, same as length. It is up to the administrator
# of the box to increase this, for reference 86400 = 1 day 
# 604800 = 1 week and 2419200 = 1 month
# DEAFULT: 900
remember_length = 900

# This is the DOMAIN for the cookie that stores your session key
# this must be set to the domain of your host or you will not be
# able to log in make sure you including the leading .
# DEFAULT: ""
#sess_domain             = .yourwebsite.com

# Name of the Session/Cookie that will sent to the browser
# default should be fine
# DEFAULT: ampache
sess_name               = ampache

# Lifetime of the Cookie, 0 == Forever (until browser close) , otherwise in terms of seconds
# DEFAULT: 0
sess_cookielife         = 0

# Is the cookie a "secure" cookie?
# DEFAULT: 0
sess_cookiesecure       = 0

####################
#  The conf vars!  #
####################

# Nuff Said
# DEFAULT: Ampache :: For The Love of Music
site_title	= "Ampache :: For The Love Of Music"

# Use Access List 
# Toggle this on if you want ampache to pay attention to the access list
# and only allow streaming/downloading/xml-rpc from known hosts by default
# xml-rpc will not working without this on.
# DEFAULT: false
#access_control	= "false"

# Require Session
# If this is set to true ampache will make sure that the URL passed when
# attempting to retrive a song contains a valid Session ID This prevents
# others from guessing URL's
# DEFAULT: true
require_session = "true"

# Use XML-RPC
# Allow XML-RPC connections, if you don't want _any_ possibility of your
# catalog being streamed from another location comment this out
# DEFAULT: false
#xml_rpc 	= "false"

# This setting allows/disallows using zlib to zip up an entire
# playlist/album for download. Even if this is turned on you will
# still need to enabled downloading for the specific user you 
# want to be able to use this function
# DEFAULT: false
#allow_zip_download = "false"

# This sets which ID3 tag takes precedence.
# we've found for those of you who don't have
# good v2 tags it's sometimes nice to keep the v1
# until you've fixed v2
# POSSIBLE VALUES: id3v1 id3v2
# DEFAULT: id3v2,id3v1
id3tag_order	= "id3v2"
id3tag_order 	= "id3v1"

# Un comment if don't want ampache to follow symlinks
# DEFAULT: false
#no_symlinks	= "false"

# Use auth?
# If this is set to "Yes" ampache will require a valid
# Username and password. If this is set to no then ampache
# will not ask you for a username and password. No is only
# recommended for internal only instances
# DEFAULT true
use_auth	= "yes"

# 5 Star Ratings
# These are disabled by default, to turn them on remove the
# comment before the value flash requires flash player and
# will cause longer load times. 
# POSSIBLE VALUES: false normal
# DEFAULT: normal
#ratings = "normal"

# This enables the ability to use custom colors for the ratings.
# This option MUST be set in order to use custom colors.
# DEFAULT: false, use the default colorset
# true: use custom colors, loaded from /templates/ratings_colors.php
#custom_ratings_colors = "false"

# This options will turn on/off Demo Mode
# If Demo mode is on you can not play songs or update your catalog
# in other words.. leave this commented out
# DEFAULT: false
#demo_mode = "false"

# Memory Limit
# This defines the "Min" memory limit for PHP if your php.ini
# has a lower value set Ampache will set it up to this. If you
# set it below 16MB getid3() will not work!
# DEFAULT: 16
#memory_limit = 16

# Album Art Preferred Filename
# Specify a filename to look for if you always give the same filename
# i.e. "folder.jpg" Ampache currently only supports jpg/gif and png
# Especially useful if you have a front and a back image in a folder
# comment out if ampache should search for any jpg,gif or png
# DEFAULT: folder.jpg
#album_art_preferred_filename = "folder.jpg" 

# Resize Images * Requires PHP-GD *
# Set this to true if you want Ampache to resize the Album
# art on the fly, this increases load time and CPU useage
# and also requires the PHP-GD library. This is very usefull
# If you have high-quality album art and a small upload cap
# DEFAULT: false
#resize_images = "false"

# Album Art Gather Order
# Simply arrange the following in the order you would like
# ampache to search if you want to disable one of the search
# method simply comment it out valid values are
# POSSIBLE VALUES: id3 folder amazon
# DEFAULT: id3,folder,amazon
album_art_order = "id3"
album_art_order = "folder"
album_art_order = "amazon"

# Album Art in Now Playing
# Set this to true if you want the now playing box to display
# album art from said album
# DEFAULT: true
play_album_art = "true"

# Amazon Developer Key
# This is needed in order to actually use the amazon album art
# DEFAULT: false
#amazon_developer_key = ""

# Amazon base urls
# An array of Amazon sites to search.
# NOTE: This will search each of these sites in turn so don't expect it
# to be lightening fast!
# It is strongly recommended that only one of these is selected at any
# one time
# Default: Just the US (.com)
amazon_base_urls = "http://webservices.amazon.com"
#amazon_base_urls = "http://webservices.amazon.co.uk"
#amazon_base_urls = "http://webservices.amazon.de"
#amazon_base_urls = "http://webservices.amazon.co.jp"
#amazon_base_urls = "http://webservices.amazon.fr"
#amazon_base_urls = "http://webservices.amazon.ca"

# max_amazon_results_pages
# The maximum number of results pages to pull from EACH amazon site
# NOTE: The art search pages through the results returned by your search
# up to this number of pages. As with the base_urls above, this is going
# to take more time, the more pages you ask it to process.
# Of course a good search will return only a few matches anyway.
# It is strongly recommended that you do _not_ change this value
# DEFAULT: 1 page (10 items)
max_amazon_results_pages = 1

# Debug
# If this is enabled Ampache will get really chatty
# warning this can crash browser during catalog builds due to 
# the amount of text that is dummped out this will also cause 
# ampache to write to the log file
# DEFAULT: false
#debug = "false"

# Debug Level
# This should always be set in conjunction with the
# debug option, it defines how prolific you want the
# debugging in ampache to be. values are 1-5. 
# 1 == Errors only
# 2 == Error + Failures (login attempts etc.)
# 3 == ??
# 4 == ?? (Profit!)
# 5 == Information (cataloging progress etc.)
# DEFAULT: 5
debug_level = 5

# Path to Log File
# This defines where you want ampache to log events to
# this will only happen if debug is turned on. Do not
# include trailing slash. Default is /tmp
# DEFAULT: /tmp
#log_path = "/tmp"

# Max Upload Size
# This sets what the max filesize for an uploaded
# file, this is good at preventing someone from
# filling up your HDD. It is mesured in bytes
# Example 1024 = 1K, 1048576 = 1MB
# Default size limit is 10Mb
# DEFAULT: 10485760
max_upload_size = "10485760"

# Charset of generated HTML pages
# Default of iso-8859-1 should work for most poeple
# DEFAULT: iso-8859-1
site_charset = iso-8859-1


##########################################################
# Public Registration settings, defaults to disabled 
##########################################################

# This setting turns on/off public registration. It is
# recommended you leave this off, as it will allow anyone to
# sign up for an account on your server.
# REMEMBER: don't forget to set the mail from address futher down in the config.
# DEFAULT: false
#allow_public_registration = "false"

# Require Captcha Text on Image confirmation
# Turning this on requires the user to correctly
# type in the letters in the image created by Captcha
# Default is off because its very hard to detect if it failed
# to draw, or they failed to enter it.
# DEFAULT: false
#captcha_public_reg = "false"

# This setting defines the mail domain your in.
# It tries to deliver a test mail before the user can register and uses
# the from address info@"domain.tld". No mail is send from this address it's
# only used to test the existense of a mailbox before accepting user registration.
# DEFAULT: domain.tld
#mail_domain = "domain.tld"

# This settting will be used as mail from address.
# You need to change this when you activate public_registration.
#mail_from = "info@domain.tld"

# This setting will allow all registrants to be auto-approved
# as a user. By default, they will be added as a guest and
# must be "promoted" by the admin.
# DEFAULT: false
#auto_user = "false"

# This will display the user agreement when registering
# For agreement text, edit templates/user_agreement.php
# User will need to accept the agreement before they can register
#user_agreement = "false"

##########################################################
# These Option Control which playback methods are allowed
##########################################################

# Stream Playback
# Disable this if you don't want to allow people to stream
# using HTTP without downsampling
# DEFAULT: true
allow_stream_playback = true

# Downsampling Playback
# Disable this if you don't want to allow people to downsample
# songs before they are streamed
# DEFAULT: false
#allow_downsample_playback = false

# LocalPlay Playback
# Disable this if you don't want to allow people to pick the 
# local playback method
# DEFAULT: false
#allow_local_playback = false

# MPD Playback
# Disable this if you don't want to allow people to push things
# to a MPD server as defined below
# DEFAULT: false
#allow_mpd_playback = false

# Icecast Playback
# Disable this if you don't have an IceCast server to push
# music to
# DEFAULT: false
#allow_icecast_playback = false

# Slim Server Playback
# Disable this if you don't have a SlimServer to push music
# to
# DEFAULT: false
#allow_slim_playback = false

#######################################################
# These options control the dynamic downsampling based
# on current useage
# *Note* Downsampling must be enabled and working
#######################################################

# Attempt to optimize bandwidth by dynamically downsampling
# all connections from users to fit within a maximum bandwidth.   
# The benefit is that it won't downsample more than it needs to.  As it only 
# adjusts the sample rate at the beginning of a song, it may take a few 
# minutes to reset all connections to a lower rate. This won't never go higher
# than a user's sample rate and only applies to users who are set to 
# the Downsample playback method
# DEFAULT: 576
#max_bit_rate = 576

# If min_bit_rate is set then new streams will be denied if it would
# cause all streams to be downsampled below this rate.
# DEFAULT: 48
#min_bit_rate = 48


#######################################################
# These options control how searching works
#######################################################

# choices are: artist,album,song_title,song_genre,song_year,song_bitrate,song_min_bitrate,song_filename
# DEFAULT: song_title
search_field = song_title

# choices are: exact,fuzzy
# DEFAULT: fuzzy
search_type  = fuzzy 

#######################################################
# This option controls what Ampache sends for the Stream name. This
# is most valuable when then 'Type of Playback' is set to downsample.
# because lame seems to strip id3 tags. if you want the Ampache default
# just leave this option commented out.
#
# the format supports the followning options:
#
# %A = album name
# %a = artist name
# %C = catalog path
# %c = id3 comment
# %g = genre
# %T = track number
# %t = song title
# %y = year
# %basename = current filename (just the actual filename)
# %catalog  = catalog name
# %filename = current filename (full path)
# %type     = song type (mp3, ogg, ...)
#
# DEFAULT: %a - %A - %t
#stream_name_format  = %a - %A - %t 


#######################################################
# These options control the down-sampling feature
# this requires you to install some applications such 
# as lame that can re-encode the mp3 for you.
# we recommend mp3splt and lame
# %FILE%	= filename
# %OFFSET%	= offset
# %SAMPLE%	= sample rate
# %EOF%		= end of file in min.sec
# DEFAULT: mp3splt -qnf "%FILE%" %OFFSET% %EOF% -o - | lame --mp3input -q 3 -b %SAMPLE% -S - -
downsample_cmd	= mp3splt -qnf %FILE% %OFFSET% %EOF% -o - | lame --mp3input -q 3 -b %SAMPLE% -S - -

#######################################################
# These are commands used to transcode non-streaming
# formats to mp3 for streaming.  Very similar to 
# downsampling, but requires something that can play
# the various file formats.  

# List of filetypes to transcode
transcode_m4a 	= true
#transcode_flac = false
#transcode_mpc  = false

# These are the commands that will be run to transcode the file
#stream_cmd_flac 	= 
#stream_cmd_m4a 	= faad -f 2 -w "%FILE%" | lame -r -b %SAMPLE% -S - -
#stream_cmd_mpc		= 

#######################################################
# These options control the "local play" feature. This requires
# a playlist manager such as moosic, winamp, xmms etc which
# can be controlled via command line.
# The defaults below are for moosic, a python based music
# player daemon. You must currently start the daemon
# yourself, because it doesn't fork right for launch
# inside apache.
# Valid replacements are:
#   %URL% 	= url to the song
#   %AMOUNT%	= amount to increase or decrese the volume by (optional)
#
# HACK alert - run moosicd as www-data user, and 
#  then set the HOME env var so moosic client 
#  can find the folder it needs b4 every call...
# Commenting this all out, unless you uncomment it...
### ADD - add song to playlist
# DEFAULT: export HOME='/var/www'; moosic -n add %URL%
#localplay_add   = "export HOME='/var/www'; moosic -n add %URL%"
### STOP - stop the playback.
# DEFAULT: export HOME='/var/www'; moosic stop
#localplay_stop  = "export HOME='/var/www'; moosic stop"
### PLAY - begin stopped or paused playback.
# DEFAULT: export HOME='/var/www'; moosic play
#localplay_play  = "export HOME='/var/www'; moosic play"
### PAUSE - pause the player
# DEFAULT: export HOME='/var/www'; moosic pause
#localplay_pause = "export HOME='/var/www'; moosic pause"
### NEXT - Skip to the next song in the list
# DEFAULT: export HOME='/var/www'; moosic next
#localplay_next  = "export HOME='/var/www'; moosic next"
### PREV - Skip to the next song in the list
# DEFAULT: export HOME='/var/www'; moosic previous
#localplay_prev  = "export HOME='/var/www'; moosic previous"
### VOLUME UP - increase the volume
# DEFAULT: amixer -q set Master %AMOUNT%%+
#localplay_volplus = "amixer -q set Master %AMOUNT%%+" 
### VOLUME DOWN - decrease the volume
# DEFAULT: amixer -q set Master %AMOUNT%%-
#localplay_volminus = "amixer -q set Master %AMOUNT%%-"
### START - NOT USED - strt the player daemon.
# DEFAULT: export HOME='/var/www'; moosicd &
#localplay_start = "export HOME='/var/www'; moosicd &"
### CLEAR - remove all from playlist and stop playing.
# DEFAULT: export HOME='/var/www'; moosic wipe
#localplay_clear = "export HOME='/var/www'; moosic wipe"
### KILL - stop the player daemon
# DEFAULT: export HOME='/var/www'; moosic die
#localplay_kill  = "export HOME='/var/www'; moosic die"
### This must return a 1 line "status report" which is
### displayed under the player controls.
# DEFAULT: export HOME='/var/www'; moosic state|grep 'items in the'
#localplay_status = "export HOME='/var/www'; moosic state|grep 'items in the'"

#######################################################
# these options allow you to configure your rss-feed
# layout. rss exists of two parts, main and song
# main is the information about the feed
# song is the information in the feed. can be multiple
#      items.
#
# use_rss = false (values true | false)
#
#DEFAULT: use_rss = false 
#use_rss = false
#
#
# rss_main_title = the title for your feed.
# DEFAULT: Ampache for the love of Music
rss_main_title = Ampache for the love of Music
# rss_main_description = the description for your feed
# DEFAULT: Rss feed for Ampache so you can monitor who is listening to what
rss_main_description = Rss feed for Ampache so you can monitor who is listening to what
# rss_main_copyright = here you can enter copyright information if you wish
# DEFAULT: copyright (c) Speedy B for Ampache
rss_main_copyright = copyright (c) Speedy B for Ampache
# rss_main_language = the feed language. Some feed readers use this.
# DEFAULT: nl
rss_main_language = nl
# rss_song_description = The description of the song.
#                        It has to start with <![CDATA[
#                        and end with ]]>. this is because xml wont parse if strange
#                        characters are used in the id3-tag
# usable items:
# $song->f_title
# $song->f_album
# $user->fullname
# $artist
# $album
# DEFAULT:  <![CDATA[$song->f_title @ $album played by  $user->fullname]]>
# FIXME it's hardcoded in lib/rss.lib.php now
#rss_song_description = <![CDATA[$song->f_title @ $album played by  $user->fullname]]>
######################################################

#######################
#  ICECAST2 Settings  #
#######################
# These settings are for the ICECAST2 support
# built into Ampache. 
######################################################
# Tracklist Filename
# This defines the file that the tracklist
# for icecast is written to, this file must
# be writeable by the web server process
# DEFAULT: /tmp/tracklist.txt
#icecast_tracklist = "/tmp/tracklist.txt"

# Icecast Command
# This is the command that is run when ampache
# attempts to start up icecast. %FILE% represents 
# the icecast_tracklist variable (Filename)
# DEFAULT: /usr/local/bin/ices -c /usr/local/etc/ices.conf -F %FILE% -B
#icecast_command = "/usr/local/bin/ices -c /usr/local/etc/ices.conf -F %FILE% -B"


#####################################################

###################
#   MPD Settings  #
###################
# These settings are for the MPD support 
# built into Ampache. 
#####################################################
# MPD Port
# This defines which port that ampache attempts to 
# connect to MPD on. 
# DEFAULT: 6600
#mpd_port = "6600"

# MPD Hostname
# This is the hostname of the computer running MPD
# DEFAULT: localhost
#mpd_host = "localhost"

# MPD Password
# This is the password for the MPD server
# DEFAULT: ""
#mpd_pass = ""

# MPD base directory
# this is the directory mpd.conf's music_directory points to, but
# it's the path on your Ampache server, not the mpd server
#mpd_dir = ""

# MPD Method
# This is the method you want to use to pass your
# music to your MPD player. Possible values are
# file and url. I highly recommend using the URL
# method as it requires less configuration. 
# POSSIBLE VALUES: file url
# DEFAULT: file
#mpd_method = "file"


# If set to true MPD is not displayed on the main page, but on it's
# own distinct page. This is called localplay, because eventually
# it will control all "LOCAL" style play methods including localplay, xmms2
# and the slimserver
# DEFAULT: false
#localplay_menu = true


#####################################################